Page 9 of 51
Copyright © 2004 Powerbookmedic.com.
All rights reserved.
Lift the metal foot holders out of their
socket, and place them in a place such
as a zip lock bag.
Note: There are a lot of screws in the
disassembly procedure. We
recommend that after each couple of
steps, you put the screws from that
step in a zip lock bag and label the bag
so you aren’t confused later.
Locate two Philips head screws inside
the battery bay, and remove them. The
location is shown in the picture.
There are two springs in the battery
bay that will come out once you
remove the casing. Make sure to put
these back in place when you
reassemble the unit.
In the battery bay there is a plastic
latch which holds the casing on. Use a
flathead screwdriver to gently pry this
out, and pull up from the corner at the
same time. Do not use excessive force
or you will break your case! Be
careful!
Commenti su questo manuale