Apple mac g4 Manuale Utente Scaricare il pdf (Pagina 106)

PowerBook G4 (1GHz/867MHz) I/O Door - 2

Procedure

1. Using needle nose pliers, pull off the rubber plugs at each end of the door. Remove

the springs, and set aside the plugs and springs.

Important: Be very careful not to damage or bend the heat exchanger pipes.

2. Pull the door away from the top case.

3. Remove the L-shaped pin from each end of the I/O door.

Note: The L-shaped pin has a knob at one end. The knobbed end holds the rubber

plug onto the L-shaped pin.

4. Install the replacement I/O door. Make sure each L-shaped pin threads through the

top case, inner clutch mount, spring, and plug.

Note: You might need to use a black stick to compress the spring while installing the

plug on each L-shaped pin.

5. Reassemble and test the computer.

1 2 ... 101 102 103 104 105 106 107 108 109 110 111 ... 138 139

Nessun commento

Apple mac g4 Manuale Utente Pagina 106