Apple Xserve Intel (Late 2006) DIY Procedure for Rear ID Manuale Utente Scaricare il pdf (Pagina 21)

Xserve (Late 2006) Rear ID Tab Replacement Instructions 21

Tighten the ve Phillips screws that fasten the airow duct to the fan array, in the order

shown, to prevent the duct from warping. Do not overtighten the screws.

Replacing the PCI Riser Cards and Expansion Cards

Align the riser with slot 1 on the logic board and press to seat the card.

Tighten the captive screws that secure the riser bracket to the back panel.

Repeat for the riser in slot 2.

1 2 ... 16 17 18 19 20 21 22

Nessun commento

Apple Xserve Intel (Late 2006) DIY Procedure for Rear ID Manuale Utente Pagina 21