Apple Xserve (Early 2008) DIY Procedure for Heat Ssink Manuale Utente Scaricare il pdf (Pagina 13)

Xserve (Late 2006/Early 2008) Processor Heat Sink Replacement Instructions 13

Ensure the airow duct ts ush all over, and does not protrude above the enclosure. 2.

Note: Be careful when working with any black foam pieces that are part of the airow duct

or the logic board.

Tighten the ve Phillips screws that fasten the airow duct to the fan array, in the order 3.

shown, to prevent the duct from warping. Do not overtighten the screws.

Closing the Xserve

Replace and secure the cover.1.

Slide the Xserve back into the rack, and tighten the front thumbscrews to secure the Xserve 2.

in the rack.

If the server case was locked, use the enclosure key to lock the security lock on the front 3.

panel.

Warning: Never turn on the server unless all of its internal and external parts are in place

and it is closed. Operating the server when it is open or missing parts can damage it or

cause injury.

1 2 ... 8 9 10 11 12 13 14

Nessun commento

Apple Xserve (Early 2008) DIY Procedure for Heat Ssink Manuale Utente Pagina 13