Apple Xserve RAID (Locking Switch Replacement) Manuale Utente Scaricare il pdf (Pagina 1)

073-0755 Rev. A



Xserve RAID

Locking Switch

Replacement Instructions

Follow the instructions in this sheet carefully. Failure to follow these instructions could

damage your equipment and void its warranty.

Online instructions covering customer-installable parts are available at

http://www.info.apple.com/installparts/.

Important:

Due to the weight of the Xserve RAID unit, two people are necessary for

moving it out of or into a rack. Do not attempt to lift or move the system without help from

another person.

Tools Required

The only tool required for this procedure is a Phillips screwdriver.

Opening Xserve RAID

To open Xserve RAID, you must ﬁrst shut down the system and remove the unit from its

rack.

1. Alert users that the Xserve RAID drives will be unavailable for a period of time.

2. If the unit is in the locked position (the yellow security LED on the front panel is on),

use the Allen key that came with the system to unlock it.

3. Shut down the system.

Warning: After you shut down Xserve RAID, internal components can be very

hot. Let the unit cool down a few minutes before continuing.

4. Unplug all external cables except the power cords.

5. Touch the Xserve RAID metal case to discharge static electricity.

Important:

Always ground yourself by touching the case before you touch any parts

or install any components inside the unit. To avoid static electricity building back up in

your body, do not walk around the room until you have completed your work and

closed the unit.

6. Unplug the power cords.

1 2 3 4 5 6

Locking Switch 1
Closing Xserve RAID 4

Sommario

Pagina 1 - Locking Switch

073-0755 Rev. A  Xserve RAID Locking Switch Replacement Instructions Follow the instructions in this sheet carefully. Failure to follow these instr

Pagina 2

Xserve RAID Locking Switch - 2 7. Remove the two screws that secure the system to the front rail of the rack. (Figure 1)Figure 1 8. Remove the two

Pagina 3

Xserve RAID Locking Switch - 3 Removing the Installed Locking Switch The locking switch is located at the front of the chassis near the inside front

Pagina 4 - Closing Xserve RAID

Xserve RAID Locking Switch - 4 Closing Xserve RAID 1. Place the cover on top of the enclosure so that it is approximately 1/4 inch back from the fro

Pagina 5

Xserve RAID Locking Switch - 5 4. With one person supporting each side of the unit, slide it all the way into the rack until the unit engages the sm

Pagina 6

Commenti su questo manuale

Nessun commento

Apple Xserve RAID (Locking Switch Replacement) Manuale Utente Pagina 1

Navigare online o scaricare Manuale Utente per Computer Apple Xserve RAID (Locking Switch Replacement). Apple Xserve RAID (Locking Switch Replacement) User Manual Manuale Utente

Sommario

Commenti su questo manuale

Apple Xserve RAID (Locking Switch Replacement) Manuale Utente Pagina 1

Navigare online o scaricare Manuale Utente per Computer Apple Xserve RAID (Locking Switch Replacement). Apple Xserve RAID (Locking Switch Replacement) User Manual Manuale Utente

Sommario

Commenti su questo manuale

Prodotti e manuali riguardandi Computer Apple Xserve RAID (Locking Switch Replacement)